• -BOX SIZE:                                          60" WIDE X 30" DEEP X 177" LONG
  • -BOX OPENING:                                 58" WIDE X 120" LONG
  • -HOPPER LOADING AREA:              70" WIDE X 120" LONG
  • -BALE CHAMBER SIDE:                    40" WIDE X 30" DEEP X 60" LONG.  (BALE WILL EXPAND TO SOME EXTENT AFTER EJECTION FROM COMPRESSION CHAMBER)
  • -MOTOR SIZE                                     (2) 100 H.P. 480V
  • -BALE WEIGHT:                                 1400 TO 1700 POUNDS. (PAPER FIBRE MATERIAL)
  • -COMPRESSION RAM:                      16" DIAMETER CYLINDER PISTON, 352 TONS FORCE,
  • -EJECTOR RAM:                                 12" DIAMETER CYLINDER ISTON, 198 TONS FORCE,
  • -STRAPPING UNIT:                            HYDRAULICALLY OPERATED AUTOMATIC U.S. STEEL ROUND STEEL STRAPPING DEVICE USING   AWG #11 SUPER HI-TEN WIRE.
  • -SHIPPING WEIGHT                          APPROXIMATELY 97,000 POUNDS TOTAL

ONE: USED MAYFRAN STEEL BELT INFEED CONVEYOR

  • -HEAVY DUTY CLOSED FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS WITH A HEAVY STEEL BELT ROLLER CHAIN BELT.
  • -BELT WIDTH 60"
  • -BELT PATH STYLE "S" SHAPED WITH A LOWER HORIZONTAL LOADING AREA OF 20' (TOP OF BELT TO BE 12" BELOW GRADE) AN INCLINE AT 30 DEGREES AN UPPER HORIZONTAL OF 15 6 DISCHARGE HEIGHT OF 10' 6" CENTER OF SHAFT
  • -BELTING 1/4 PLATE 6 PITCH PIANO HINGE STEEL BELT 

CONSTRUCTED AS FOLLOWS:

  • -BUSHINGS .76X 1.12 ODX 2.06 LONG 1018 SOLID, MACHINED BUSHING. CARBURIZED, HARDENED RC 55-60, PRESS FIT INTO INNER SIDE BARS.
  • -PINS STEEL, 3/4 "DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO 
  • -BELT PANS 1/4" THICK, 60 WIDE PRECISION DIE FORMED PANS FULLY CLOSED LOOPS
  • -REINFORCEMENTS CHANNEL REINFORCEMENTS WELDED TO THE UNDER SIDE ACROSS THE WIDTH OF EVERY OTHER HINGE  LINK.  THIS INCREASES THE STRENGTH OF BELT PAN AS WELL AS LIMITS DEFLECTION OF BELT UNDER SEVERE IMPACT. IMPACT SHOES @ CENTER.
  • SIDE WINGS 3" HIGH PRECISION DIE FORMED INTERLOCKING OFFSET WINGS, 1/4" THICK, WINGS PLUG WELDED TO PANS 2" WIDE X 1/4" THICK (2) STRANDS
  • -CHAIN 2" WIDE X 1/4" THICK (2) STRANDS
  • -SIDE BARS PRECISION DIE PUNCHED HIGH CARBON STEEL
  • -BUSHINGS SOLID, 3/4" I.D. X 1-1/8" O.D. X 2-1/16" HARDENED LIFE
  • -PINS STEEL, ¾" DIAMETER, PIN ENDS ARE MILLED FLAT TO LOCK INTO OUTER SIDE BARS
  • -ROLLERS SINGLE FLANGE: 3” DIAMETER X 1-1/2" FACE HARDENED SINTERED STEEL WHEELS
  • -TRACKS 3/8" THICK ANGLE TRACK 1/2" THICK TRANSITIONS DESIGNED TO PREVENT MATERIAL BUILDUP AND PROVIDE A SMOOTH SURFACE FOR BELT AND ROLLERS TO TRAVEL.
  • -CLEATS ANGLE TYPE, 3" HIGH AND 4" HIGH ALTERNATING CLEATS @ 60 CENTERS.
  • -BELT SPROCKETS 6 TOOTH, 6" PITCH, 12" PITCH DIAMETER, HARDENED TEETH AT TAIL AND HEAD ENDS OF CONVEYOR.
  • -DRIVE 10 HP 1800 RPM VARIABLE SPEED ELECTRIC MOTOR 230/460 VOLTS, 3 PHASE, 60 HERTZ, TEFC CONTINUOUS DUTY MOTOR WITH A 1.15 S.F. AND ROLLER CHAIN FROM REDUCER TO SPROCKET OF HEAD SHAFT.  CHAIN TYPE 140# THIS CONVEYOR ALSO SUPPLIED WITH A SHEAR PIN SPROCKET HUB
ASSEMBLY FOR OVERLOAD PROTECTION WITH 3/4" SHEAR PIN 60 TOOTH SPROCKET.

  • -TRANSMISSION CLASS 3 DODGE 258.63 RATIO OR EQUAL
  • -SPEED MAXIMUM F.P.M. 40
  • -SHAFTING HEAD SHAFT 3 15/16 DIA. TAIL SHAFT 2 7/16.
  • -SPECIAL FEATURES CONVEYOR IS FURNISHED WITH BACKSTOP TO  PREVENT CONVEYOR BELT FROM ROLL BACK UNDER FULL LOAD.  ELECTRIC OILER(S), GRAVITY FED, 1 QUART CAPACITY.  ALSO INCLUDED AND SHIPPED  LOOSE FOR FIELD MOUNTING ARE (2) PUSH BUTTON  STOPS AND DISCONNECT SWITCH. 
  • -SIDE & BELLY GUARDS PROVIDED IN AREAS OF PERSONAL ACCESS UP TO 8’ ABOVE GRADE.
  • -SIDE SKIRTS 12" HIGH ON LOWER HORIZONTAL AND 42" HIGH ON INCLINE AND UPPER HORIZONTAL
  • -LOAD BAR TO LIMIT DEFLECTION OF BELT UNDER IMPACT LOWER HORIZONTAL

LOGEMANN BALER

Multi-purpose AT Series Balers

Manufacture: LOGEMANN BROTHERS 2-RAM PRESS
MODEL 245C-AT RIGHT HAND SERIAL #15123
Stock Number: 8030

800 639-6306 ext 2

Inquire Used Recycling Equipment