800 639-6306 ext 2
Inquire Used Recycling Equipment
    

    

Manufacture: SYNECTIC SYSTEMS
MONITOR PROCESSING SYSTEM
Stock Number: 1010
Price: 153,440.00

ONE - MODEL MB-3-6-FER-EV


DRAWING SSP-011404ADPM1.
ONE SLIDER BED INFEED CONVEYOR

  1. BELT WIDTH 30
  2. BELT TYPE 150 # ROUGH TOP
  3. LOWER HORIZONTAL 20
  4. INCLINE 24
  5. HEAD PULLY 8
  6. MOTOR SIZE 5 H.P. 480V.
  7. DUST COLLECTION HOOD 8 X 20
  8. CONVEYOR COVER FULL LENGTH OF INCLINE
ONE- MONITOR BREAKER

  1. FEED OPENING 36 X 28 
  2. ROTOR ADJUSTABLE SIZING
  3. ROTOR SPEED 500 R.P.M. ADJUSTABLE
  4. MOTOR SIZE 20 H.P. 480V.
  5. DUST ENCLOSURE PROVIDED
ONE- SLIDER BED TRANSFER CONVEYOR / MAGNETIC SEPERATOR

  1. BELT WIDTH 36
  2. BELT TYPE 200 # PVC
  3. CONVEYOR LENGTH 18
  4. BED TYPE STAINLESS UNDER MAGNET
  5. HEAD PULLY 10 SUPER DUTY MAGNETIC
  6. MOTOR SIZE 3 H.P. 480V.
ONE CROSS BELT MAGNETIC SEPARATOR

  1. BELT WIDTH 18
  2. BELT TYPE 200 # PVC CLEATED
  3. CONVEYOR LENGTH 48
  4. MOTOR SIZE 2 h.p.
ONE SEPARATOR SYSTEM

  1. DECK SIZE 42 X 96
  2. UPPER DECK FINGER TYPE
  3. LOWER DECK PUNCH PLATE
  4. MOTOR SIZE 20 H.P. 480V.
ONE FULL DUST ENCLOSURE OVER SEPARATOR SYSTEM

  1. SIZE 86 W X 24 L X 15 H
  2. OPENINGS STRIP CURTAIN BOX ACCESS
ONE- USED HIGH DENSITY BALER

  1. BALE SIZE 60X 44 X 30
  2. BALE WEIGHT 400-600 lbs. 
  3. MOTOR SIZE 10 H.P. 480V.
ONE- NEW AMERI-KART BIN TIPPER

  1. CART SIZE 2 cu. yd. (4) PROVIDED
  2. TIPPER CAPACITY 1,500 lbs.
  3. MOTOR SIZE 2 H.P. 480 V.
ONE EXHAUST FILTRATION FOR ELECTRONIC COMPONENT CRUSHING DUST 

COLLECTION SYSTEM SERIES MODEL: 8

Selected for 5795 CFM @ 9 Inches Static Pressure, modular design unit includes: Housing made of 7 and 10-guage construction; tool-less quick-open access door(s); super-fast cartridge change-out system that does not require entry into the collector; complete pulse system for cartridge back-flush cleaning, compressed air header, diaphragms and solenoids in NEMA 4 enclosure; support structure giving 54 clearance under the hopper, patent pending Gold Cone cartridge for maximum airflow at the lowest pressure drop available; power coat paint finish, inside and outside, PTS Olieophobic Poly Tech cartridge: Silicon treated for moisture resistance Total Media Area: 3400 sq. feet providing an Air to Cloth Ration of: 1.70:1 for this application.

ONE DCT 1000 TIMER CONTROL. Master Controller with plug in pressure sensor, on demand cleaning and continuous cleaning functions pre-wired to external switch. NEMA 4X enclosure, 110/240 vax., 50/60 hz., single phase, Digital pressure read out.

  1. TWO DRUM COVER KIT(S) Drum cover, flex-hose, clamps, slide gate with integral transition (no drum). 55-gallon drum(s) (Qty 2)

  2. ONE FAN, DIRECT DRIVE (18PLR-6.0-60-9), NEW YORK BLOWER 15 HP with fan outlet, damper.

  3. ONE MOTOR STARTER, 480 V/60Hz/3PH, NEMA 12, for remote mounting by others.

  4. ONE NEW GAYLORD BOX TIPPER CAPACITY OF 2,500 LBS, 1.5 HP MOTOR, GROUND MOUNTED, FLOOR LEVEL LOADING, OPEN CHUTE WITH A 44-1/2 TIP HEIGHT, DELIVERY AND INSTALLATION PROVIDED

  5. ONE CARBON AFTER FILER MODULE with twelve (12) 24x 24 x 2 rechargeable Carbon absorbers, twelve (12) 30/30 disposable pre-filters, steel housing with side access Doors and transition to HEPA filter 

  6. REPLACEMENT FILTERS: Each Camfil Farr Gold Series PTS-Poly Filter Cartridge 

  7. ONE AIR MAKE-UP SYSTEM Provided with adjustable blast gates, ducting, through wall installation, for use with heppa and charcoal filter. Designed to provide negative pressure in computer recycling room. 

COMPLETE INSTALLATION OF DUST COLLECTOR DUCT WORK, BLAST GATES, MAGNETTELIC GAUGES, CLEANOUTS, FANS, MONITORING SENSORS, INCLUDING MECHANICAL ASSEMBLY AND INTERCONNECTING WIRING OF TOTAL COMPUTER PROCESSING SYSTEM.