Recycling Equipment

Green Machineยฎ provides a service to our new equipment customers for placement of their used recycling equipment. Our 30 plus years of experience in the industry enables our engineers to assist used equipment buyers in making the right equipment selection for optimal results. We currently have a huge inventory of used and reconditioned recycling equipment components and systems received in trade or consignment and available immediately at below market value. Equipment categories we currently have in inventory are as follows:


Complete Single Stream Systems
Complete Container Sort Lines
Complete CD Processing Systems
Used Optical Sorters
Used Conveyers

Used Shredders
Used Baling Systems
Used Screening Systems
Air Separation Systems
Used Magnets

Balers



    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Harris
HRB 616N
Stock Number: 8023
Price: $190,000.00 with conveyor

HARRIS SELCO TWO RAM BALING PRESS

One: Used HRB-616N BR-BD-XP
Date of Manufacturing 11/95
Serial Number 8219
-This bailing system is currently in good working order and can be seen operating in Long Island, NY.

  • Hopper Opening                       52" x 80"
  • Wire strapper                          US wire Tier
  • Motor size                              100 HP 460 3ph 60 Hz
  • Main Cylinder                          12" bore 158 Tons of Force
  • Ejector Cylinder `                     9" bore 89 Tons of Force
  • Bale Weights                          Up to 1400 Lbs. Plastics
  • Wear Liner Condition                80% life plus.

Options Provided:

  • Bale Release Door
  • Bale Separation Door
  • Navigation System
  • Operators Cabin
  • Non-Ferrous Floor Liners
  • Upper Photo Eyes
  • Bale Table

Specifications 1

Specifications 2

Specifications 3


    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Bollegraff 140
140S
Stock Number: 8016
Price: $125,000.00 FOB VA

hours 40274
w hopper and ruffler
Serial # 230079.03

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: C&M
Model 50-42
Stock Number: 8006
Price: $9,000.00

WIDE MOUTH OPEN END AUTO TIE BALER
ONE: AS-IS Condition MODEL 50 - 42 AUTO-TIE BALER

FEED OPENING 50” X 42”
BALE SIZE 42” X 42” X VARIABLE
WIRE SLOTS 5 WIRE SWING OUT SYSTEM
MAIN CYLINDER 10” BORE
TENSION CYLINDER (DUAL) 4” BORE
MOTOR SIZE 75 H.P. 480 VOLT
CONTROLS ALLEN BRADLEY COMPUTER
CYCLE CONTROLS LIGHT SENSITIVE TYPE
WIRE SYSTEM 100# SPOOL SYSTEM

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: IBC
HORIZONTAL CLOSED DOOR BALER MODEL LD-54-SD
Stock Number: 8001
Price: $19,000.00 FOB N.Y

ONE: USED IBC HORIZONTAL CLOSED DOOR BALER MODEL LD-54-SD

HYDRAULIC
Manifold Hydraulic System
JIC Standard Hydraulics Rated to 3,000 PSI
Reservoir Clean-Out Ports
Main Cylinder Bore 6", Stroke 50", Rod 4"
Door Cylinder Bore 4", Stroke 8", Rod 1 พ"
System Pressure 2,900 PSI
Total Force 81,995 Lbs.
Platen Pressure 56 PSI
Cycle Time (No Load) 19 Seconds
Reservoir Oil Capacity 120 Gallons

ELECTRICAL
Auto Start Sonic Beam Operated Sensor
Completed Bale Alarm
Power on Beacon (Amber)
Main Motor 30 HP/575 Volt

PERFORMANCE
Bale Size Expanded 54" Wide x 27" High x 45” L
Bale Volume 38 Cubic Feet Expanded (Approximate)
Cycle Time 19 Seconds
Capacity 4,237 Cubic Feet Per Hour (No Load)

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: International
IB4430-9-60HD s/n 60043 baler
Stock Number: 8021
Price: $24,000.00 FOB New Hampshire


    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: KMF
Closed Door 3036 Baling System
Stock Number: 8002
Price: $8,000.00 FOB N.Y

ONE: USED KMF Closed Door 3036 Baling System

Feed opening 30" x 50"
Bale size 42" x 30" x 30"
5" main cylinder
2 single door cylinder
10 h.p. motor

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: MSI
Vertical Baler
Stock Number: 8010
Price: $2,500.00

Model 60
10HP
600 Volt

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: American
Non-Ferrous Lay-Down Baler and Steel Belt Infeed System
Stock Number: 8019
Price: $

Baler

  1. Model NF-4560L-1050

  2. Serial Number 9438512

  3. Main Cylinder 10 Bore

  4. Motor Size 40 H.P. 460 Volts

  5. Feed opening 45” x 60”



Steel Belt Infeed System

  1. Belt width 60”

  2. Lower horizontal 12’

  3. Upper Horizontal 3’

  4. Motor Size 5 HP 460 Volts

Total System Sell price As is
Total System Sell Price Reconditioned 90 Parts warranty

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Bollegraaf
140 Baler
Stock Number: 8003
Price: $250,000 FOB Oakland

Type HBC 140 MK 2x75kW
Weight 47000 Kg
Year of construction 2008

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Cross Wrap
DIRECT BALE WRAPPER
Stock Number: 2012
Price: $Best Offer


1. Suitable for all 2-ram balers
2. No need for ties - meaning lower cost and more production
3. Direct wrapping from the bale chamber - meaning clean process, no litter
4. Each bale securely and durably wrapped for transport and storage
5. Fully automatic to save labour costs
6. Suitable for all materials such as RDF, SRF, MSW, recyclables
7. Makes it possible to bale and wrap challenging materials like wood chips and fibres
8. Bales and stretch wraps sensitive materials as well, without any damage of wires or ties.


    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Global
Vertical Baler
Stock Number: 8009
Price: $3,000.00

Model 160
10 HP
208 Volt

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Harris
HRB Centurion Two-Ram high capacity baling system
Stock Number: 8020
Price: $295,000 Reconditioned FOB N.Y

Year 2007, Discharge Right Hand, 150 HP, Wire Tier Accent 11 ga.

Machine is disassembled and ready for immediate loading with the main cylinder removed. The Main cylinder is rebuilt and never placed in production. Machine wear liners are in fair condition. Minor structural damage to rear yoke cylinder support As Is Price

MACHINE SPECIFICATIONS



SPECIFICATIONS

DRAWING

MACHINE SPECIFICATIONS


MODEL
HRB-CENTURION-150
BALE SIZE Width
Height
Length
45"
31"
64"
BALE VOLUME cu.ft. 51.5
CHARGE BOX OPENING inches 57" x 105.5"
HOPPER OPENING inches 86" x 116.5"
MAIN PUMP
403
CYCLE TIME seconds 15.6
SYSTEM PRESSURE PSI 3500
MAIN RAM FACE PRESSURE PSI 280
EJECTOR RAM FACE PRESSURE PSI 209
SHIPPING WEIGHT tons 57
CAPACITY Bulk OCC
Solid Waste
Newsprint
Al. Cans
Steel Cans
Plastic
Non-Ferrous
23-35 T/hr
39-59 T/hr
34-45 T/hr
13-22 T/hr
34-46 T/hr
11-21 T/hr
22-37 T/hr
BALING MATERIAL Bulk OCC
Solid Waste
Newsprint
Al. Cans
Steel Cans
Plastic
Non-Ferrous
1250-1550lbs
1820-2340lbs
1375-1750lbs
1000-1200lbs
1550-2250lbs
1250-1650lbs
1500-2400lbs



    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Selco
Narrow Frame Two Ram Auto Tie
Stock Number: 8012
Price: $65,000.00

2R - 10 - 75
Sacramento CA

CandD Recycling

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: OEM
C&D Sort line
Stock Number: 1012
Price: $550,000.00 FOB Long Island

Components Drawing




Conveyor System

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Green Machine
NURRC Infeed Conveyor
Stock Number: 10018
Price: $38,000.00

Conveyor Drawing

-HEAVY DUTY CLOSED FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS WITH A HEAVY DUTY 9” PITCH COMBINATION BELT CONVEYOR.

This unit is an Green Machine product which are to be sold in reconditioned and warranted condition. Sell price reconditioned painted with a new lower horizontal frame – original didn’t make the trip up - #38K less than ฝ of new price. Like new condition. 60 day major parts warranty.

-BELT WIDTH            60”
-BELT PATH STYLE        “S” SHAPED WITH A LOWER HORIZONTAL LOADING
AREA OF 33’ (TOP OF BELT TO BE 18” BELOW GRADE DESIGNED TO FIT EXISTING    PIT) AN INCLINE SECTION OF 21’ 6” AT 35 DEGREES AND AN UPPER HORIZONTAL SECTION OF 6’6”
-BELTING            330# RUBBER 3/16 X 1/16 COVERS
-REINFORCEMENTS    CHANNEL CROSS MEMBERS 6”X 8.2# CHANNEL EVERY OTHER     PITCH. CENTER LINE IMPACT SHOES DESIGNED OF HIGH CARBON STEEL.
SIDE WINGS            4” HIGH PRECISION DIE FORMED INTERLOCKING
                OFFSET WINGS, ผ” THICK,
-CHAIN            2” WIDE X 1/4” THICK (2) STRANDS 9,000 # WORKING LOAD
-SIDE BARS            PRECISION DIE PUNCHED HIGH CARBON STEEL
-BUSHINGS    .76 X 1.12 ODX 2.06 LONG 1018 SOLID, MACHINED BUSHING. CARBURIZED, HARDENED RC 55-60, PRESS FIT INTO INNER SIDE BARS.
-PINS    STEEL, พ” DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO LOCK INTO OUTER SIDE BAR, HEAT TREATED AND DRILLED FOR ผ”X 1” EXTENED PRONG COTTER PIN.
                LOCK INTO OUTER SIDE BARS
-ROLLERS            SINGLE FLANGE: 3” DIAMETER X 1.94” THROUGH HARDENED
                SINTERED STEEL WHEELS
-TRACKS            3/8” THICK STEEL ROLLER TRACKS WITH ฝ” THICK AT TRANSITIONS
-CLEATS    ANGLE TYPE, ผ” THICK AND 4” HIGH @ 48” CENTERS.
-BELT SPROCKETS    6 TOOTH, 9” PITCH, 18” PITCH DIAMETER, FLAME CUT WITH HARDENED TEETH AT TAIL AND HEAD ENDS OF CONVEYOR.
-DRIVE            10 HP 1800 RPM VARIABLE SPEED ELECTRIC MOTOR 230/460 VOLTS, 3
                PHASE, 60 HERTZ, TEFC CONTINUOUS DUTY MOTOR
                WITH A 1.15 S.F. AND ROLLER CHAIN FROM REDUCER
                TO SPROCKET OF HEAD SHAFT.  CHAIN TYPE 120#. THIS CONVEYOR
                ALSO SUPPLIED WITH A SHEAR PIN SPROCKET HUB
ASSEMBLY FOR OVERLOAD PROTECTION WITH 3/4” SHEAR PIN 45 TOOTH SPROCKET.
-TRANSMISSION        GROUP 8 DODGE QUANTIS DRIVE
-SPEED            MAXIMUM F.P.M. 50
-SHAFTING            HEAD SHAFT 3 7/16” DIA. TAIL SHAFT 2 7/16.
-SPECIAL FEATURES        CONVEYOR IS FURNISHED WITH BACKSTOP TO
                PREVENT CONVEYOR BELT FROM ROLL BACK UNDER
                FULL LOAD.  ELECTRIC OILER(S), GRAVITY FED, 1
                QUART CAPACITY.  ALSO INCLUDED AND SHIPPED
                LOOSE FOR FIELD MOUNTING ARE (2) PUSH BUTTON
“E” STOPS AND DISCONNECT SWITCH. REMOVABLE TAIL SECTION FOR FULL ACCESS TO BEARINGS, SHAFT AND BELTING.
-SIDE & BELLY GUARDS    PROVIDED IN AREAS OF PERSONAL ACCESS UP TO 8’
                ABOVE GRADE.
-SIDE SKIRTS            18” DEEP ON HORIZONTAL AND 42” HIGH ON
                INCLINE AND UPPER HORIZONTAL
-LOAD BAR    IMPACT RAIL TO LIMIT DEFLECTION OF BELT UNDER IMPACT FULL LENGTH OF CONVEYOR
-PAINT            FINISH COAT TO SUIT



Conveyors



800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Davco
Idler Conveyor
Stock Number: 10017
Price: $9,000.00

Length: 17’-0”
Width: 24”
Number of sections: 1
Motor HP: 3 Ratio:
Needs Belt: Yes

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Davco
Chain-Edge In-feed Conveyor
Stock Number: 10012
Price: $35,000.00 Reconditioned $19,000.00 as is

Length: 58’-6”
Width: 60”
Number of sections: 5
Motor HP: 5 Ratio: 86.41:1
Needs Belt: Combo belt needs new rollers

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Green Machine
NURRC Infeed Conveyor
Stock Number: 10018
Price: $38,000.00

Conveyor Drawing

-HEAVY DUTY CLOSED FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS WITH A HEAVY DUTY 9” PITCH COMBINATION BELT CONVEYOR.

This unit is an Green Machine product which are to be sold in reconditioned and warranted condition. Sell price reconditioned painted with a new lower horizontal frame – original didn’t make the trip up - #38K less than ฝ of new price. Like new condition. 60 day major parts warranty.

-BELT WIDTH            60”
-BELT PATH STYLE        “S” SHAPED WITH A LOWER HORIZONTAL LOADING
AREA OF 33’ (TOP OF BELT TO BE 18” BELOW GRADE DESIGNED TO FIT EXISTING    PIT) AN INCLINE SECTION OF 21’ 6” AT 35 DEGREES AND AN UPPER HORIZONTAL SECTION OF 6’6”
-BELTING            330# RUBBER 3/16 X 1/16 COVERS
-REINFORCEMENTS    CHANNEL CROSS MEMBERS 6”X 8.2# CHANNEL EVERY OTHER     PITCH. CENTER LINE IMPACT SHOES DESIGNED OF HIGH CARBON STEEL.
SIDE WINGS            4” HIGH PRECISION DIE FORMED INTERLOCKING
                OFFSET WINGS, ผ” THICK,
-CHAIN            2” WIDE X 1/4” THICK (2) STRANDS 9,000 # WORKING LOAD
-SIDE BARS            PRECISION DIE PUNCHED HIGH CARBON STEEL
-BUSHINGS    .76 X 1.12 ODX 2.06 LONG 1018 SOLID, MACHINED BUSHING. CARBURIZED, HARDENED RC 55-60, PRESS FIT INTO INNER SIDE BARS.
-PINS    STEEL, พ” DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO LOCK INTO OUTER SIDE BAR, HEAT TREATED AND DRILLED FOR ผ”X 1” EXTENED PRONG COTTER PIN.
                LOCK INTO OUTER SIDE BARS
-ROLLERS            SINGLE FLANGE: 3” DIAMETER X 1.94” THROUGH HARDENED
                SINTERED STEEL WHEELS
-TRACKS            3/8” THICK STEEL ROLLER TRACKS WITH ฝ” THICK AT TRANSITIONS
-CLEATS    ANGLE TYPE, ผ” THICK AND 4” HIGH @ 48” CENTERS.
-BELT SPROCKETS    6 TOOTH, 9” PITCH, 18” PITCH DIAMETER, FLAME CUT WITH HARDENED TEETH AT TAIL AND HEAD ENDS OF CONVEYOR.
-DRIVE            10 HP 1800 RPM VARIABLE SPEED ELECTRIC MOTOR 230/460 VOLTS, 3
                PHASE, 60 HERTZ, TEFC CONTINUOUS DUTY MOTOR
                WITH A 1.15 S.F. AND ROLLER CHAIN FROM REDUCER
                TO SPROCKET OF HEAD SHAFT.  CHAIN TYPE 120#. THIS CONVEYOR
                ALSO SUPPLIED WITH A SHEAR PIN SPROCKET HUB
ASSEMBLY FOR OVERLOAD PROTECTION WITH 3/4” SHEAR PIN 45 TOOTH SPROCKET.
-TRANSMISSION        GROUP 8 DODGE QUANTIS DRIVE
-SPEED            MAXIMUM F.P.M. 50
-SHAFTING            HEAD SHAFT 3 7/16” DIA. TAIL SHAFT 2 7/16.
-SPECIAL FEATURES        CONVEYOR IS FURNISHED WITH BACKSTOP TO
                PREVENT CONVEYOR BELT FROM ROLL BACK UNDER
                FULL LOAD.  ELECTRIC OILER(S), GRAVITY FED, 1
                QUART CAPACITY.  ALSO INCLUDED AND SHIPPED
                LOOSE FOR FIELD MOUNTING ARE (2) PUSH BUTTON
“E” STOPS AND DISCONNECT SWITCH. REMOVABLE TAIL SECTION FOR FULL ACCESS TO BEARINGS, SHAFT AND BELTING.
-SIDE & BELLY GUARDS    PROVIDED IN AREAS OF PERSONAL ACCESS UP TO 8’
                ABOVE GRADE.
-SIDE SKIRTS            18” DEEP ON HORIZONTAL AND 42” HIGH ON
                INCLINE AND UPPER HORIZONTAL
-LOAD BAR    IMPACT RAIL TO LIMIT DEFLECTION OF BELT UNDER IMPACT FULL LENGTH OF CONVEYOR
-PAINT            FINISH COAT TO SUIT



    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Davco
Slider Infeed Conveyor
Stock Number: 10015
Price: $19,000.00

Length: 28’-3”
Width: 60”
Cleats 3" alternating Patern
Number of sections: 1
Motor HP: 3 Ratio: 23.11:1
Needs Belt: No Other: Needs idler bearings on one side


    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Davco
Idler Conveyor
Stock Number: 10016
Price: $19,000.00

Length: 47’-0”
Width: 24”
Number of sections: 4
Motor HP: 3 Ratio: 23.11:1
Needs Belt: Yes

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Slider Bed Conveyor
Stock Number: 10008
Price: $6,500.00

• 8in pulleys
• 5ft wide belt
• 12in frame height
• 9ft overall length
• 5 HP Motor
• Reducer ratio – 30.89:1
• Belt Good condition 220#

Drum System

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Trommel
Trommel Drum System
Stock Number: 4009
Price: $35,000.00

FOB Philidelphia
7' diameter Drum
18' OAL
Drive 10 Hp cushion tire drive
Drum Type 2" punched plate drum closed down to 1/2" approx.

Dry Waste Recycling

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Lubo
Modular Commercial Mixed Waste - Dry Waste Sorting System
Stock Number: 1009
Price: $450,000.00

Drawing of System


E-Waste Recycling

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: SYNECTIC SYSTEMS
MONITOR PROCESSING SYSTEM
Stock Number: 1010
Price: $153,440.00

ONE - MODEL MB-3-6-FER-EV

ONE – SLIDER BED INFEED CONVEYOR

  1. BELT WIDTH 30”
  2. BELT TYPE 150 # ROUGH TOP
  3. LOWER HORIZONTAL 20’
  4. INCLINE 24’
  5. HEAD PULLY 8”
  6. MOTOR SIZE 5 H.P. 480V.
  7. DUST COLLECTION HOOD 8’ X 20’
  8. CONVEYOR COVER FULL LENGTH OF INCLINE
ONE- MONITOR BREAKER

  1. FEED OPENING 36” X 28” 
  2. ROTOR ADJUSTABLE SIZING
  3. ROTOR SPEED 500 R.P.M. ADJUSTABLE
  4. MOTOR SIZE 20 H.P. 480V.
  5. DUST ENCLOSURE PROVIDED
ONE- SLIDER BED TRANSFER CONVEYOR / MAGNETIC SEPERATOR

  1. BELT WIDTH 36”
  2. BELT TYPE 200 # PVC
  3. CONVEYOR LENGTH 18’
  4. BED TYPE STAINLESS UNDER MAGNET
  5. HEAD PULLY 10” SUPER DUTY MAGNETIC
  6. MOTOR SIZE 3 H.P. 480V.
ONE – CROSS BELT MAGNETIC SEPARATOR

  1. BELT WIDTH 18”
  2. BELT TYPE 200 # PVC CLEATED
  3. CONVEYOR LENGTH 48”
  4. MOTOR SIZE 2 h.p.
ONE – SEPARATOR SYSTEM

  1. DECK SIZE 42” X 96”
  2. UPPER DECK FINGER TYPE
  3. LOWER DECK PUNCH PLATE
  4. MOTOR SIZE 20 H.P. 480V.
ONE – FULL DUST ENCLOSURE OVER SEPARATOR SYSTEM

  1. SIZE 8’6” W X 24’ L X 15’ H
  2. OPENINGS STRIP CURTAIN BOX ACCESS
ONE- USED HIGH DENSITY BALER

  1. BALE SIZE 60”X 44” X 30”
  2. BALE WEIGHT 400-600 lbs. 
  3. MOTOR SIZE 10 H.P. 480V.
ONE- NEW AMERI-KART BIN TIPPER

  1. CART SIZE 2 cu. yd. (4) PROVIDED
  2. TIPPER CAPACITY 1,500 lbs.
  3. MOTOR SIZE 2 H.P. 480 V.
ONE EXHAUST FILTRATION FOR ELECTRONIC COMPONENT CRUSHING DUST 

COLLECTION SYSTEM SERIES MODEL: 8

Selected for 5795 CFM @ 9 Inches Static Pressure, modular design unit includes: Housing made of 7 and 10-guage construction; tool-less quick-open access door(s); super-fast cartridge change-out system that does not require entry into the collector; complete pulse system for cartridge back-flush cleaning, compressed air header, diaphragms and solenoids in NEMA 4 enclosure; support structure giving 54” clearance under the hopper, patent pending Gold Cone cartridge for maximum airflow at the lowest pressure drop available; power coat paint finish, inside and outside, PTS Olieophobic Poly Tech cartridge: Silicon treated for moisture resistance Total Media Area: 3400 sq. feet providing an Air to Cloth Ration of: 1.70:1 for this application.

ONE DCT 1000 TIMER CONTROL. Master Controller with plug in pressure sensor, on demand cleaning and continuous cleaning functions pre-wired to external switch. NEMA 4X enclosure, 110/240 vax., 50/60 hz., single phase, Digital pressure read out.

  1. TWO DRUM COVER KIT(S) Drum cover, flex-hose, clamps, slide gate with integral transition (no drum). 55-gallon drum(s) (Qty 2)

  2. ONE FAN, DIRECT DRIVE (18PLR-6.0-60-9), NEW YORK BLOWER 15 HP with fan outlet, damper.

  3. ONE MOTOR STARTER, 480 V/60Hz/3PH, NEMA 12, for remote mounting by others.

  4. ONE NEW GAYLORD BOX TIPPER CAPACITY OF 2,500 LBS, 1.5 HP MOTOR, GROUND MOUNTED, FLOOR LEVEL LOADING, OPEN CHUTE WITH A 44-1/2” TIP HEIGHT, DELIVERY AND INSTALLATION PROVIDED

  5. ONE CARBON AFTER FILER MODULE with twelve (12) 24”x 24” x 2” rechargeable Carbon absorbers, twelve (12) 30/30 disposable pre-filters, steel housing with side access Doors and transition to HEPA filter 

  6. REPLACEMENT FILTERS: Each Camfil Farr Gold Series PTS-Poly Filter Cartridge 

  7. ONE AIR MAKE-UP SYSTEM Provided with adjustable blast gates, ducting, through wall installation, for use with heppa and charcoal filter. Designed to provide negative pressure in computer recycling room. 

COMPLETE INSTALLATION OF DUST COLLECTOR DUCT WORK, BLAST GATES, MAGNETTELIC GAUGES, CLEANOUTS, FANS, MONITORING SENSORS, INCLUDING MECHANICAL ASSEMBLY AND INTERCONNECTING WIRING OF TOTAL COMPUTER PROCESSING SYSTEM.

Mezzanines Sort Decks

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Mezzanines Sort Decks
Stock Number: 2008
Price: $Call for Pricing

(2) pieces – 102” wide x 20’-0” long
(1) piece – 102” wide x 12’-4” long
(1) piece – 60” wide x 15’-8” long
(2) pieces – 100” wide x 25’-0” long

Optical Sorting

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Green Machine LLC
Green Eye Optical Sorter
Stock Number: 3003
Price: $140,000.00 FOB Memphis TN

Recondition and Warranty


    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Green Stream
Optical PET Sorter with Accelerator
Stock Number: 3002
Price: $55,000.00

66" wide S+S Optical PET Sorter w Accelerator

Plastics Recovery Facility (PRF)



800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Plastics Recovery Facility (PRF)
Stock Number: 1008
Price: $780,000.00 FOB N.Y

PRF - COMPLETE COMINGELD CONTAINER RECYCLING FACILITY
ONE: BALE DEWIRING CONVEYOR FEED SYSTEM MODEL CB-6-60-11-23A35-27

-HEAVY DUTY CLOSED-OPEN FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS     WITH A HEAVY STEEL PAN ROLLER CHAIN BELT.

-BELT WIDTH            60”

-BELT PATH STYLE    “S” SHAPED WITH A LOWER HORIZONTAL FEED AREA OF 10’ 7” (TOP OF BELT TO BE AT GRADE) AN INCLINE SECTION OF 22’ 10” AT 35 DEGREES AND AN UPPER HORIZONTAL SECTION OF 3’.

-BELTING             COMBO BELT 6” PITCH PIANO HINGE STEEL BELT
                CONSTRUCTED AS FOLLOWS:

-BUSHINGS    .76 ID X 1.12 OD X 2.06 LONG 1018 SOLID, MACHINED BUSHING. CARBURIZED, HARDENED RC 55-60, PRESS FIT INTO INNER SIDE BARS.

-PINS                STEEL, พ” DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO

-BELT PANS            ผ” THICK, 60” WIDE PRECISION DIE FORMED PANS
                FULLY CLOSED LOOPS

-REINFORCEMENTS    CHANNEL REINFORCEMENTS WELDED TO THE UNDER     SIDE ACROSS THE WIDTH OF EVERY OTHER HINGE LINK.  THIS INCREASES THE STRENGTH OF BELT PAN AS WELL AS LIMITS DEFLECTION OF BELT UNDER SEVERE IMPACT. IMPACT SHOES @ CENTER.

SIDE WINGS    3” HIGH PRECISION DIE FORMED INTERLOCKING OFFSET WINGS, ผ” THICK, WINGS PLUG WELDED TO PANS
 
-CHAIN            2” WIDE X 3/8” THICK (2) STRANDS 14,000# BELT PULL

-SIDE BARS            PRECISION DIE PUNCHED HIGH CARBON STEEL

-BUSHINGS            SOLID, พ” I.D. X 1-1/8” O.D. X 2-1/16” HARDENED

-HINGE SLEEVE    STEEL TUBING LINER OVER PIN THROUGH BELT HINGE JOINT TO ENHANCE STRENGTH AND EXTEND LIFE

-PINS                STEEL, พ” DIAMETER, PIN ENDS ARE MILLED FLAT TO
                LOCK INTO OUTER SIDE BARS

-ROLLERS            SINGLE FLANGE: 3” DIAMETER X 1-1/2” FACE HARDENED
                SINTERED STEEL WHEELS

-TRACKS    30# ASCE RAIL DESIGNED TO PREVENT MATERIAL BUILDUP AND PROVIDE A SMOOTH SURFACE FOR BELT AND ROLLERS TO TRAVEL.

-CLEATS    ANGLE TYPE, 4” & 3” HIGH ALTERNATING CLEATS @ 48” CENTERS.

-BELT SPROCKETS        6 TOOTH, 6” PITCH, 12” PITCH DIAMETER, WITH HARDENED TEETH

-DRIVE            10 HP 1800 RPM VARIABLE SPEED ELECTRIC MOTOR 230/460 VOLTS, 3 PHASE, 60 HERTZ, TEFC CONTINUOUS DUTY MOTOR WITH A 1.15 S.F. AND ROLLER CHAIN FROM REDUCER TO SPROCKET OF HEAD SHAFT.  CHAIN TYPE 140#.  THIS CONVEYOR ALSO SUPPLIED WITH A SHEAR PIN SPROCKET HUB ASSEMBLY FOR OVERLOAD PROTECTION WITH 1” SHEAR PIN 60 TOOTH SPROCKET.

-TRANSMISSION        DODGE QUANTIS

-SPEED            MAXIMUM F.P.M. 60

-SHAFTING            HEAD SHAFT 3 7/16 DIA. TAIL SHAFT 2 7/16.

-SPECIAL FEATURES    CONVEYOR IS FURNISHED WITH BACKSTOP TO PREVENT CONVEYOR BELT FROM ROLL BACK UNDER FULL LOAD.  ELECTRIC OILER(S), GRAVITY FED, 1 QUART CAPACITY.  ALSO INCLUDED AND SHIPPED LOOSE FOR FIELD MOUNTING ARE (2) PUSH BUTTON “E” STOPS.  REMOVABLE TAIL SECTION FOR FULL ACCESS TO BEARINGS, SHAFT AND BELTING.

-SIDE & BELLY GUARDS    PROVIDED IN AREAS OF PERSONAL ACCESS UP TO 8’ ABOVE GRADE.

-SIDE SKIRTS            24” HIGH ON LOWER HORIZONTAL AND 42” HIGH ON
    INCLINE AND UPPER HORIZONTAL

-LOAD BAR    SINGLE IMPACT RAILS TO LIMIT DEFLECTION OF BELT UNDER FULL LOAD LENGTH OF CONVEYOR

-PAINT            FINISH COAT TO SUIT


ONE: GS-1 GREEN SCREENSฎ MINI POLISHER REMOVAL SYSTEM MODEL 72-16

-POLISHING SYSTEM IS DESIGNED TO SEPERATE FIBER AND PLASTIC BAG TYPE RESIDUE FROM POST CONSUMER CONTAINERS.

 SCREEN WIDTH:        72” WIDE.SCREEN

SCREEN LENGTH        185” LONG

DISCS:                COMPOSITE DISCSSPACERS            PATENT PEND METAL WRAP RESISTANT DISC SPACERS

IFO:                9/16” X 2 3/4”

SHAFTS:            (16) 3” SQUARE SHAFTS.

MOTORS:     (1) 7 ฝ HP, (1) 5 HP TEFC ENERGY EFFICIENT BREAK MOTOR
REDUCERS:            SHAFT MOUNTED REDUCERS.

DRIVES:            VARIABLE FREQUENCY DRIVES PROVIDED

ANGLE:    MAIN DECK 35ฐ TO 45ฐ INCLINE HYDRAULICALLY ADJUSTMENT TAIL DECK 25ฐ ADDITIONAL UPWARD INCLINE HYDRAULICALLY
ADJUSTMENT. DUAL CONTROLLED CYLINDERS WITH PUMP AND HOLDING TANK

AUTO LUBE:    AUTOMATIC OILER FOR DRIVE CHAIN, SELINOID DRIVED THROUGH MANIFOLD SYSTEM.

WEIGHT:            APPROX. 13,800 POUNDS. (PLUS CHUTES AND SUPPORTS)
SUPPORTS   PROVIDED CHUTES PROVIDED

ONE: C-2 MINI POLISHER UNDERS CONVEYOR MODEL SL TNSFR 60-14
-HEAVY DUTY TROUGHED STYLE SLIDER BED TRANSFER CONVEYOR BUILT IN ACCORDANCE WITH INDUSTRY STANDARDS.

-BELT WIDTH            60”

-CONVEYOR LENGTH    13’11”

-BELT TYPE            330# 3 PLY RUBBER COS CHEVRON CLEATED

-MOTOR            5 H.P. 230/460 TEFC

-DRIVE            DODGE TYPE DIRECT DRIVE

-BELT SPEED            175 FPM

-DRIVE PULLEY        12” LAGGED HEAD PULLEY

-TAIL PULLEY        12” SELF CLEANING TAIL PULLEY

-SIDE WINGS            24” TALL BOTH SIDES

ONE: C-3 MEETERING INFEED CONVEYOR MODEL SL TNSFR 48-27
-HEAVY DUTY TROUGHED STYLE SLIDER BED TRANSFER CONVEYOR BUILT IN ACCORDANCE WITH INDUSTRY STANDARDS.

-BELT WIDTH            48”

-CONVEYOR LENGTH    26’11”

-BELT TYPE            250# 2 PLY RUBBER COS

-CLEATS            3” TALL STAGGERED CLEATS @ ALTERNATING 18” CENTERS

-MOTOR            5 H.P. 230/460 TEFC

-DRIVE            DODGE TYPE DIRECT DRIVE

-BELT SPEED            175 FPM

-DRIVE PULLEY        12” LAGGED HEAD PULLEY

-TAIL PULLEY        12” SELF CLEANING TAIL PULLEY

-SIDE WINGS            24” TALL BOTH SIDES


ONE: GS-2 GREEN SCREENSฎ FINES REMOVAL SYSTEM MODEL 48-5
-FINES REMOVAL SYSTEM IS DESIGNED TO SEPARATE RESIDUAL CONTAMINANTS FROM CONTAINERS.
 
 SCREEN WIDTH:        48” WIDE SCREEN

DISCS:        STEEL STAR DISCS HARDENED TO 500 BRINELL

IFO:        SHAFTS 1-5 ARE 5/8” X 2 ผ”

SHAFTS:        5 SHAFT 3” SQUARE SHAFTS.

MOTORS:        ONE (1) 5 HP TEFC ENERGY EFFICIENT GEAR MOTORS (460/3/60)

REDUCERS:        SHAFT MOUNTED REDUCER.

DRIVES:        VARIABLE FREQUENCY DRIVE
ANGLE:        FIXED

AUTO LUBE:        AUTOMATIC OILER FOR DRIVE CHAIN, SOLENOID DRIVE THROUGH MANIFOLD SYSTEM.

WEIGHT:        APPROX. 4,000 POUNDS. SUPPORTS PROVIDED CHUTES        PROVIDED

ONE: C-4 MAGNET TRANSFER CONVEYOR MODEL SL TNSFR 48-16
-HEAVY DUTY TROUGHED STYLE SLIDER BED TRANSFER CONVEYOR BUILT IN ACCORDANCE WITH INDUSTRY STANDARDS.

-BELT WIDTH            48”

-CONVEYOR LENGTH    15’7”

-BELT TYPE            250# 2 PLY RUBBER COS

-MOTOR            3 H.P. 230/460 TEFC

-DRIVE            DODGE TYPE DIRECT DRIVE

-BELT SPEED            175 FPM

-STAINLESS BED        4’ LONG UNDER MAGNET

-DRIVE PULLEY        10” LAGGED HEAD PULLEY

-TAIL PULLEY        10” SELF CLEANING TAIL PULLEY

-SIDE WINGS            12” TALL BOTH SIDES

ONE: CBM-1 CROSS BELT MAGNETIC SEPARATOR MODEL CBS-36

-CROSS BELT MAGNETIC SEPARATOR DESIGNED TO LIFT TIN CANS FROM THE COMMINGLED SORT BELT AND DEPOSIT IN THE DESIRED GRAVITY DISCHARGE BIN.

BELT WIDTH            30”

CLEATS            3” TALL @ 24” CENTERS

BELT TYPE            2 PLY 200# RUBBER

MAGNET SIZE        36” X 16” PERMANENT
SUPPORT STRUCTURE    HEAVY STRUCTURAL STEEL

FOUR: MZ-1 POST SORT MEZZANINE MODEL STMZ 4-8-V-125
-MEZZANINE DESIGN AS A COMBINATION CONTAINER POST-SORT/ GREEN EYE MAINTENANCE PLATFORM.STRUCTURAL IS BUILT OF HEAVY STRUCTURAL SHAPES AND IS DESIGNED TO MEET OSHA STANDARDS AND CODE.

DECK FOOTPRINT        130 TOTAL SQUARE FEET

DESIGN LOAD        125 PSF

COLUMN SIZE        6” TUBE

DECK HEIGHT        VARYING HEIGHTS

DECK TYPE            ANTI-SKID DIAMOND PLATE

STAIRS            (1) SET EACH DECK

FOUR: GE-1, 2, 3, 4 GREEN EYEฎ OPTICAL SORTER MODEL GE-60-5-SRT
-PATENT PENDING OPTICAL SORTING SYSTEM DESIGNED FOR POST CONSUMER WHOLE BOTTLE SORTING AT AN ESTIMATED RATE OF 9 TONS PER HOUR. MULTIPLE GRADE SELECTION

ACCELERATOR BELT WIDTH            60
”
ACCELERATOR CONVEYOR LENGTH        12’ MAXIMUM

BELT TYPE                        200# PVC CHEMICAL RESISTANT COS

CONVEYOR DRIVE                    7.5 hp 400 – 700 fpm

EJECTION AIR NOZZLES       (78)HIGH SPEED INDIVIDUALLY ACTIVATED

EJECTOR PLATE AIR KNIFE    DESIGNED TO AUTOMATICALLY CLEAN BELT

EVACUATION SYSTEM                3 hp CONVEYOR DISCHARGE WITH SORT AREA

LIGHT BAR SOURCE    AUTOMATICALLY ADJUSTING

TOUCH SCREEN OPERATION    FULL DIAGNOSTICS & MATERIAL SELECTION
REMOTE ACCESS    ETHERNET EXTERNAL MODEM CONNECTION
CLIMATE CONTROLS    OPTICAL SENSOR CABINET HVAC SYSTEM
PICK RATES     90% OR HIGHER DEPENDING ON RESIDUE
RESIDUE RATES    5% OR LESS

OUTSIDE AIR DUCT WORK FOR ALL AIR CONDITIONING UNITS BY OTHERS

FOUR: C-5,6,7 MEETERING OPTICAL INFEED CONVEYOR MODEL SL TNSFR 48-27

-HEAVY DUTY TROUGHED STYLE SLIDER BED TRANSFER CONVEYOR
BUILT IN ACCORDANCE WITH INDUSTRY STANDARDS.

-BELT WIDTH            48”

-CONVEYOR LENGTH    20’11”

-BELT TYPE            250# 2 PLY RUBBER COS

-CLEATS            3” TALL STAGGERED CLEATS @ ALTERNATING 18” CENTERS

-MOTOR            5 H.P. 230/460 TEFC

-DRIVE            DODGE TYPE DIRECT DRIVE

-BELT SPEED            175 FPM

-DRIVE PULLEY        12” LAGGED HEAD PULLEY

-TAIL PULLEY        12” SELF CLEANING TAIL PULLEY

-SIDE WINGS            24” TALL BOTH SIDES

FOUR: C-8 METERING EDDY CURRENT INFEED CONVEYOR MODEL SL TNSFR 48-27

-HEAVY DUTY TROUGHED STYLE SLIDER BED TRANSFER CONVEYOR BUILT IN ACCORDANCE WITH INDUSTRY STANDARDS.

-BELT WIDTH            48”

-CONVEYOR LENGTH    24’11”

-BELT TYPE            250# 2 PLY RUBBER COS

-CLEATS            3” TALL STAGGERED CLEATS @ ALTERNATING 18” CENTERS

-MOTOR            5 H.P. 230/460 TEFC

-DRIVE            DODGE TYPE DIRECT DRIVE

-BELT SPEED            175 FPM

-DRIVE PULLEY        12” LAGGED HEAD PULLEY

-TAIL PULLEY        12” SELF CLEANING TAIL PULLEY

-SIDE WINGS            24” TALL BOTH SIDES

ONE: EC-1 EDDY CURRENT SEPARATOR MODEL REEC 14-30-8
-EDDY CURRENT ALUMINUM SEPARATOR BUILT WITH A WALKER MAGNETICS REEC EDDY CURRENT HEAD AND AN ACCOMPANIED GREEN CONVEYOR.

CONVEYOR WIDTH        30”

CONVEYOR LENGTH        7’

BELT TYPE            PVK WITH 2” BELT SIDE WALLS

EDDY HEAD            14” DIA. REEC HEAD

MOTOR SIZE            10 H.P. 460V

TAIL PULLEY            14” LAGGED TAIL PULLEY DRIVE

MOTOR SIZE             2 H.P. DIRECT DRIVE

ONE: ELC-1 MODEL EL-C-BG
 -ELECTRICAL CONTROL PANELS BUILT IN ACCORDANCE TO STATE AND FEDERAL REGULATIONS. VARIABLE SPEED CONTROLS ADDED TO OPERATE AND INTERFACE CUSTOMERS BALE BREAKER WITH GMS SYSTEM. THE ENTIRE SYSTEM WILL HAVE FULL AUTOMATIC START AND MAINTENANCE MODE OPERATIONS. ALL CONVEYORS TRANSPORTING ACCEPT THE RE-RUN CONVEYOR WILL HAVE VARIABLE SPEED DRIVES TO ALLOW FOR BELT AND SCREEN SHAFT SPEED ADJUSTMENTS. FIELD WIRING AND ELECTRICAL DROPS BY OTHERS. ALL MUSHROOM HEAD, PULL CORD EMERGENCY STOPS CONTROLS PROVIDED.
ETHERNET CXONECTED SMART CONTROLS WILL BE PROVIDED TO ALLOW EXTERNAL MAINTENANCE INTERFACE AND SYSTEM INFORMATION DOWN LOADS.

ONE: EC-1 EDDY CURRENT SEPARATOR MODEL REEC 14-30-8
-EDDY CURRENT ALUMINUM SEPARATOR BUILT WITH A WALKER MAGNETICS REEC EDDY CURRENT HEAD AND AN ACCOMPANIED GREEN CONVEYOR.

CONVEYOR WIDTH        30”

CONVEYOR LENGTH        7’

BELT TYPE            PVK WITH 2” BELT SIDE WALLS

EDDY HEAD            14” DIA. REEC HEAD

MOTOR SIZE            10 H.P. 460V

TAIL PULLEY            14” LAGGED TAIL PULLEY DRIVE

MOTOR SIZE             2 H.P. DIRECT DRIVE

SELL PRICE (RECONDITIONED) …………………. $780,000.00 USD


Plastics Recovery Facility (PRF)

Screens

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Green Screensฎ
Fine Removal System Model: FRS-48-5
Stock Number: 4012
Price: $23,400.00 FOB: Factory

Glass breaker system is designed to break and separate glass from commingled single stream material.

  • Screen Width 48” Wide Screen
  • Discs Steel Star Discs Hardened To 500 Brinell
  • IFO (Inter-Face Openings) Shafts 1-5, 5/8” x 2 ผ”
  • Shafts 5 Shaft 3” Square Shafts
  • Motor 5HP TEFC Energy Efficient (460/3/60), Gear-Reduced
  • Drive Variable
  • Angle Fixed
  • Auto lube Automatic oiler for drive chain, solenoid derived through manifold system.
  • Supports Provided
  • Chutes Provided

MANUAL 1 Model

MANUAL 2 Model

Shredders

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Chain Flail Fluffer/Conditioner
Stock Number: 6003
Price: $8,000.00

Chain Flail Fluffer/Conditioner (1)
20hp motors.
Hydraulic diverter.
Feed opening 60” x 60”.
Discharge 42” x 60”

Drawing

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Dual Disc Swing Out Fluffer/Conditioner
Stock Number: 6001
Price: $14,000.00

Dual Disc Swing
Out Fluffer/Conditioner (2) 10hp motors.
Manual swing out. Chamber opening 42” x 72”

More Information
Drawing

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Shred Tech
ST-20 Slow Speed Shear Shredder
Stock Number: 6004
Price: $15,000.00


    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:
Single Disc Swing Out Fluffer/Conditioner
Stock Number: 6002
Price: $8,500.00

Single Disc Swing Out Fluffer/Conditioner
10hp motor.
Manual swing out.
Chamber opening 30” x 50”

More Information

Single Stream Processing Equipment

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: BHS
Single Stream System
Stock Number: 1011
Price: $420,000.00



Drawing 1
Drawing 2
Drawing 3
Drawing 4

Single Stream Recycling

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: BHS
Single Stream System
Stock Number: 1011
Price: $420,000.00



Drawing 1
Drawing 2
Drawing 3
Drawing 4

Single Stream

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: BHS
Single Stream System
Stock Number: 1011
Price: $420,000.00



Drawing 1
Drawing 2
Drawing 3
Drawing 4

Sorting System

    

    


800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture: Amen-Shred
High Grade Sorting System
Stock Number: 1013
Price: $50,000.00

Amen-Shred High Grade Sorting System



800 639-6306 ext 2
Inquire Used Recycling Equipment

Manufacture:

Stock Number:
Price: $